Chapter 20. Tigase PubSub Component

Table of Contents

PubSub Component
Announcement
Configuration
Database
Features
AdHoc Commands
REST API
Limitations
Addressing

Welcome to Tigase PubSub component guide

PubSub Component

Tigase’s Publish Subscribe component is an XEP-0060 compliant plugin handling all publish and subscribe activity within Tigase server. This is enabled as default with the pubsub name, however you may include the following line if you wish to customize it’s configuration.

pubsub () {}

You may change the name so long as you specify the pubsub class within parenthesis.

Announcement

Major changes

Tigase pubsub component has undergone a few major changes to our code and structure. To continue to use Tigase pubsub component, a few changes may be needed to be made to your systems. Please see them below:

Database schema changes

Current version comes with changes to database schema to improve JID comparison during lookup of nodes, subscriptions, affiliations, etc.

To continue usage of new versions of pubsub component it is required to manually load new component database schema, see database preparation section for more information.

Warning

Loading of new database schema is required to use new version of pubsub component.

Changes in REST API

We continuously work on improving usability and making our REST API easier to use we added support for handling JSON requests in REST API for pubsub. At the same time we decided to slightly modify responses in XML sent by REST API to make responses in JSON and XML similar.

For more informations about current REST API please look into Rest API section.

New features

Support for using separate database for different domains

Since this version it is possible to use separate pubsub nodes and items based on domains. This allows you to configure component to store informations about nodes and items for particular domain to different database.

For more informations please look into using multiple databases.

Support for MAM

In this version we added support for XEP-0313: Message Archive Management protocol which allows any MAM compatible XMPP client with pubsub support to retrieve items published on pubsub nodes using MAM protocol for querying.

Configuration

Pubsub naming

Within Tigase, all pubsub component address MUST be domain-based address and not a JID style address. This was made to simplify communications structure. Tigase will automatically set component names to pubsub.domain, however any messages send to pubsub@domain will result in a SERVICE_UNAVAILABLE error.

Pubsub nodes within Tigase can be found as a combination of JID and node where nodes will be identified akin to service discovery. For example, to address a friendly node, use the following structure:

<iq to='pubsub.domain'>
  <query node='friendly node'/>
</iq>

Configure Roster Maximum size

Administrators can configure the maximum allowable roster size per user via the config.tdsl file.

'sess-man' {
    'jabber:iqa:roster' {
        max_roster_size = '100'
    }
}

This sets the roster limit to 100 entries per user. It can be set to any integer, however by default no limit is set and no configuration is set in config.tdsl file.

Store Full XML of Last Presence

Tigase can store a more detailed <unavailable/> presence stanza to include timestamps and other information.

Requirements

Ensure that presence-offline plugin is enabled in config.tdsl. To do this, add be sure presence-offline is listed under sess-man

'sess-man' {
    'presence-offline' () {}
}

The following two lines in sess-man configure options to broadcast probes to offline users.

'sess-man' {
    'skip-offline' = 'false'
    'skip-offline-sys' = 'false'
}

Without these lines, Tigase will not send presence probes to users that the server knows to be offline.

The full XML presence is stored under the tig_pairs table with a pkey of last-unavailable-presence will look like this:

<presence from="user@example.com" xmlns="jabber:client" type="unavailable">
<status>Logged out</status>
<delay stamp="2015-12-29T16:51:50.748Z" xmlns="urn:xmpp:delay"/></presence>

As you can see, the plugin has added a delay stamp which indicates the last time they were seen online. This may be suppressed by using the following line in your config.tdsl file.

'sess-man' {
    'delay-stamp' = 'false'
}

You may also limit probe responses only to newly connected resources.

'sess-man' {
    'probe-full-jid' = 'true'
}

When a user logs on, they will receive the same full unavailable presence statements from contacts not logged in. Also the repository entry containing their last unavailable presence will be removed.

NOTE: This will increase traffic with users with many people on their rosters.

Using separate store

As mentioned above, by default Tigase pubsub component uses default data source configured for Tigase XMPP Server. It is possible to use separate store by pubsub component. To do so you need to configure new DataSource in dataSource section. Here we will use pubsub-store as name of newly configured data source. Additionally you need to pass name of newly configured data source to dataSourceName property of default DAO of pubsub component.

dataSource {
    pubsub-store () {
        uri = 'jdbc:postgresql://server/pubsub-database'
    }
}

pubsub () {
    dao {
        default () {
            dataSourceName = 'pubsub-store'
        }
    }
}

It is also possible to configure separate store for particular domain, ie. pubsub.example.com. Here we will configure data source with name pubsub.example.com and use it to store data for pubsub nodes and items at pubsub.example.com:

dataSource {
    'pubsub.example.com' () {
        uri = 'jdbc:postgresql://server/example-database'
    }
}

pubsub () {
    dao {
        'pubsub.example.com' () {
          # we may not set dataSourceName as it matches name of domain
        }
    }
}

Note

With this configuration, data for other domains than pubsub.example.com will be stored in default data source.

Enabling PEP support

To enable XEP-0163: Personal Eventing Protocol support it is required to set persistent-pep property of pubsub component to true, set send-last-published-item-on-presence property of component to true and enable pep SessionManager processor.

pubsub () {
    persistent-pep = true
    send-last-published-item-on-presence = true
}

sess-man () {
    pep () {
    }
}

Note

If your pubsub component uses different name than pubsub then you need to set pubsub-jid property of pep processor to JID of pubsub component make it aware of a different name of a pubsub component.

Example with pubsub component named events hosted at server named servername.com and enabled PEP. 

events () {
    persistent-pep = true
    send-last-published-item-on-presence = true
}
sess-man () {
    pep () {
        'pubsub-jid' = 'events@servername.com'
    }
}

Enabling REST API

To use REST API for pubsub component it is required that:

  • Tigase HTTP API component is installed and configured properly. For information about HTTP API component installation please look into HTTP component documentation.
  • Tigase pubsub REST scripts are copied to HTTP API REST scripts directory In installation package this is already done and scripts are in proper locations. dd* JID of HTTP API component needs to be added to list of trusted jids of Tigase pubsub component trusted property (if http is name of HTTP API component)
pubsub () {
    trusted = [ 'http@{clusterNode}' ];
}

Changing nodes cache size

By default Tigase pubsub component caches node configuration of 2000 last loaded nodes. If there are many requests to database to load node configuration and your installation contains many nodes it may be a good idea to increase number of cached nodes.

To do this you need to set pubsub-repository-cache-size property of pubsub component to new size.

pubsub () {
    pubsub-repository-cache-size = 4000
}

Enable sending last published item on presence

By default it is not possible to use delivery of last published item when users broadcasts initial presence. To do so you need to set send-last-published-item-on-presence of pubsub component to true. This will allow you to configure nodes to send last published item on presence.

pubsub () {
    send-last-published-item-on-presence = true
}

Tune handling of low memory

If there is less than 10% of free heap memory available during publication of item then Tigase pubsub component will trigger Garbage Collection and it there is still very little amount of free memory will slow down delivery of notifications for published items (waiting about 1 second before continuing).

If you have assigned a lot of memory to Tigase XMPP Server or in your case this delay is not acceptable you can adjust it by pubsub component properties:

  • setting pubsub-high-memory-usage-level to percentage of heap memory accepted as near OOM state
  • setting pubsub-low-memory-delay to number of milliseconds to wait to throttle delivery of notifications
pubsub () {
    pubsub-high-memory-usage-level = 95
    pubsub-low-memory-delay = 100
}

Disable automatic subscription of node creator

During creation of node pubsub component subscribes creator to pubsub node and delivers notifications to creator. If in your case you do not want this behavior, you may set auto-subscribe-node-creator property of pubsub component to false.

pubsub () {
    auto-subscribe-node-creator = false
}

Database

Preparation of database

Before you will be able to use Tigase PubSub Component you need to initialize database. We provide few schemas for this component for MySQL, PostgreSQL, SQLServer and DerbyDB.

They are placed in database/ directory of installation package and named in dbtype-pubsub-version.sql, where dbname in name of database type which this schema supports and version is version of a PubSub component for which this schema is designed.

You need to manually select schema for correct database and component and load this schema to database. For more information about loading database schema look into database preperation section of this guide.

Upgrade of database schema

Database schema for our components may change between versions and if so it needs to be updated before new version may be started. To upgrade schema please follow instructions from the database preperation section.

Note

If you use SNAPSHOT builds then schema may change for same version as this are versions we are still working on.

Schema description

Tigase PubSub component uses few tables and stored procedures. To make it easier to identify tables and stored procedures used by PubSub component they are prefixed with tig_pubsub_.

Table tig_pubsub_service_jids

This table stores all jids for which PubSub component contains nodes.

FieldDescriptionComments

service_id

Database ID of a service JID

 

service_jid

Value of a service JID

 

service_jid_sha1

SHA1 value of lowercased service JID

Used for proper bare JID comparison during lookup.

(N/A to PostgreSQL schema)

Table tig_pubsub_jids

This table stores all jids related to PubSub nodes, ie. subscriber, affiliates, creators, publishers, etc.

FieldDescriptionComments

jid_id

Database ID of a bare JID

 

jid

Value of a bare JID

 

jid_sha1

SHA1 value of lowercased bare JID

Used for proper bare JID comparison during lookup.

(N/A to PostgreSQL schema)

Table tig_pubsub_nodes

Table stores nodes tree structure and node configuration.

FieldDescriptionComments

node_id

Database ID of a node

 

service_id

ID of service JID

References service_id from tig_pubsub_service_jids

name

Name of PubSub node

 

name_sha1

SHA1 of PubSub node name

Used for indexing and faster lookup.

(N/A to PostgreSQL schema)

type

Type of PubSub node

0 - collection

1 - leaf

title

Title of PubSub node

 

description

Description of a node

 

creator_id

ID of JID of creator

References jid_id from tig_pubsub_jids

creation_date

Timestamp of creation time

 

configuration

Serialized configuration of PubSub node

 

collection_id

Points collection (parent node)

References node_id from tig_pubsub_nodes

Table tig_pubsub_affiliations

Table stores affiliations between PubSub nodes and jids.

FieldDescriptionComments

node_id

ID of a node

References node_id from tig_pubsub_nodes

jid_id

ID of a user JID

References jid_id from tig_pubsub_jids

affiliation

Affiliation value

 
Table tig_pubsub_subscriptions

Table stores subscriptions of jids to PubSub nodes.

FieldDescriptionComments

node_id

ID of a node

References node_id from tig_pubsub_nodes

jid_id

ID of a user JID

References jid_id from tig_pubsub_jids

subscription

Subscription value

 

subscription_id

Id of a subscription

 
Table tig_pubsub_items

Table stores items of PubSub nodes.

Field

Description

Comments

node_id

ID of a node

References node_id from tig_pubsub_nodes

id

Id of an items

 

id_sha1

SHA1 of item id

Indexed and used for faster lookup

(N/A to PostgreSQL schema)

creation_date

Creation date

 

publisher_id

ID of publisher JID

References jid_id from tig_pubsub_jids

update_date

Timestamp of last item modification

 

data

Item payload

 

PubSub Schema Changes

Tigase PubSub Component is currently version 3.3.0 which is introduced in Tigase server v8.0.0.

PubSub 3.2.0 Changes

PubSub v 3.2.0 adds a new procedure TigPubSubGetNodeMeta which supports PubSub metadata retrieval while conducting a disco#info query on nodes.

You will need to upgrade your database if you are not using v3.2.0 schema. Tigase will report being unable to load PubSub component if you do not have this schema version.

The MySQL schema can be found Here.

The Derby schema can be found Here.

The PostGRESQL schema can be found Here.

The MS SQL schema can be found Here.

The same files are also included in all distributions of v8.0.0 in [tigaseroot]/database/ . All changes to database schema are meant to be backward compatible.

For instructions how to manually upgrade the databases, please refer to Tigase v7.1.0 Schema Updates section.

Upgrading older installations (pre-v3.0.0 Schema)

To update older installations of Tigase to the PubSub Schema v3.0.0 follow these instructions. Note this should be done before upgrading to PubSub v3.1.0.

Step by Step guide.

Prepare Old Database for Upgrade

In database directory of Tigase installation you will find SQL files which will prepare old database schema for upgrade using following this naming pattern: <database_type>-pubsub-schema-3.0.0-pre-upgrade.sql Where <database_type> can be one of the following: mysql, sqlserver, ie. for MySQL you will find the file mysql-pubsub-schema-3.0.0-pre-upgrade.sql. You need to execute statements from this file on your source database, which will drop old procedures and functions used to access database and also this statements will rename old tables by adding suffix _1 to each of old tables. Example:

MySQL
mysql -u tigase -p tigase_pubsub < database/mysql-pubsub-schema-3.0.0-pre-upgrade.sql
MS SQL
sqlcmd -S %servername% -U %root_user% -P %root_pass% -d %database% -i database\sqlserver-pubsub-schema-3.0.0-pre-upgrade.sql
Update Tigase PubSub Component

For this you need to copy the Tigase PubSub Component jar file to jars directory inside Tigase XMPP Server installation directory. It is also recommended to copy files from database directory of Tigase PubSub Component to database directory in Tigase XMPP Server installation directory.

If you happen to use one of the the distribution packaged (either installer or -dist-max flavored archive) then all required files are already available - both new schema files will be available in database/ directory as well as both versions of PubSub component will be present in jars/ directory - PubSub3 as tigase-pubsub.jar and PubSub2 as tigase-pubsub-2.2.0.jar.old (provided for compatibility reasons).

Load New Schema

In the database directory you will find files containing new schemas for:

  • MySQL - mysql-pubsub-schema-3.0.0.sql
  • PostgreSQL - postgresql-pubsub-schema-3.0.0.sql
  • MSSQL - sqlserver-pubsub-schema-3.0.0.sql
  • DerbyDB - derby-pubsub-schema-3.0.0.sql and pubsub-db-create-derby.sh

For most databases, with the exception of Derby, you only need to execute statements from the proper file. For example:

MySQL
mysql -u tigase -p tigase_pubsub < database/mysql-pubsub-schema-3.0.0.sql
MS SQL
sqlcmd -S %servername% -U %root_user% -P %root_pass% -d %database% -i database\sqlserver-pubsub-schema-3.0.0.sql
PostgreSQL
psql -h $DB_HOST -q -U ${USR_NAME} -d $DB_NAME -f database/sqlserver-pubsub-schema-3.0.0.sql

For DerbyDB you need to execute the pubsub-db-create-derby.sh script and pass proper JDBC URI to database to which you want to load schema (if database does not exist, it will be created).

database/pubsub-db-create-derby.sh

NOTE: It is possible to use same database which was used before - then after upgrade you will have new tables and old tables with _1 suffix.

Execute Migration Utility

In the /database directory you will find the pubsub-db-migrate.sh file which you need to execute and pass arguments with JDBC URIs needed to connect to source and destination database. If you used dedicated tables for PubSub you will also need to pass a class name used to access database (value of pubsub-repo-class variable from etc/config.tdsl file).

Example for dedicated table used for PubSub:

database/pubsub-db-migrate.sh -in-repo-class tigase.pubsub.repository.PubSubDAO
-in 'jdbc:mysql://localhost/tigase_pubsub?user=tigase&password=passwd'
-out 'jdbc:mysql://localhost/tigase_pubsub?user=tigase&password=passwd'

Example for use without dedicated PubSub tables:

database/pubsub-db-migrate.sh
-in 'jdbc:mysql://localhost/tigase?user=tigase&password=passwd'
-out 'jdbc:mysql://localhost/tigase?user=tigase&password=passwd'

Example for use with dedicated tables in a Windows environment:

database/pubsub-db-migrate.cmd -in-repo-class tigase.pubsub.repository.PubSubDAO
-in 'jdbc:sqlserver://<hostname>\\<instance>:<port>;databaseName=<name>;user=tigase;password=tigase;schema=dbo;lastUpdateCount=false'
-out 'jdbc:sqlserver://<hostname>\\<instance>:<port>;databaseName=<name>;user=tigase;password=tigase;schema=dbo;lastUpdateCount=false'

During execution this utility will report information about migration of PubSub data to the new schema, and the same information will be store in pubsub_db_migration.log.

Finish

After successful migration you will have all data copied to new tables. Old tables will be renamed by adding suffix _1. After verification that everything works OK, you can delete old tables and it’s content as it want be used any more.

Features

AdHoc Commands

Similar to the HTTP API, AdHoc commands based on groovy scripts can be sent to this component to do a number of tasks. All scripts for these Ad-hoc commands are found at sec/main/groovy/tigase/admin in source distributions, or at this link. To use them, the scripts need to be copied into the scripts/admin/pubsub folder in the Tigase installation directory. For all examples, the component address will be pubsub.example.com.

Create a Node

Ad-hoc command node: create-node Required role: Service Administrator

Command requires fields node and pubsub#node_type to be filled with proper values for execution. - node Field containing id of node to create. - pubsub#node_type Contains one of two possible values. * leaf-node Node that will be published. * collection Node that will contain other nodes.

Other fields are optional fields that can be set to change configuration of newly create node to different configuration than default.

Example call using TCLMT:

bin/tclmt.sh -u admin@example.com -p admin123 remote pubsub.example.com create-node example admin@example.com leaf

Delete a Node

Ad-hoc command node: delete-node Required role: Service Administrator

Command requires node field to be filled. - node Field containing id of node to delete.

Example call using TCLMT:

bin/tclmt.sh -u admin@example.com -p admin123 remote pubsub.example.com delete-node example

Subscribe to a Node

Ad-hoc command node: subscribe-node Required role: Service Administrator

Command requires node and jids nodes to be filled. - node Field containing node to subscribe to. - jids Field containing list of JIDs to subscribe to the node.

Example call using TCLMT:

bin/tclmt.sh -u admin@example.com -p admin123 remote pubsub.example.com subscribe-node example admin@example.com,test1@example.com

Unsubscribe to a Node

Ad-hoc command node: unsubscribe-node Required role: Service Administrator

Command requires node and jids nodes to be filled. - node Field containing node to unsubscribe to. - jids Field containing list of JIDs to unsubscribe to the node.

Example call using TCLMT:

bin/tclmt.sh -u admin@example.com -p admin123 remote pubsub.example.com unsubscribe-node example admin@example.com,test2@example.com

Publish an item to a Node

Ad-hoc command node: publish-item Required role: Service Administrator

Command requires fields node and entry to be filled. - node Field containing id of node to publish to. - item-id Field may contain id of entry to publish, can be empty. - entry Field should contain multi-line entry content that should be valid XML values for items.

This command due to it’s complexity cannot be easily executed by TCLMT using default remote script which provides support for basic adhoc commands. Example call using TCLMT:

bin/tclmt.sh -u admin@example.com -p admin123 remote pubsub.example.com publish-item example item-1 '<entry><title>Example 1</title></entry>'

Example Groovy script to execute create-node command using JAXMPP2

import tigase.jaxmpp.j2se.Jaxmpp
import tigase.jaxmpp.core.client.AsyncCallback
import tigase.jaxmpp.core.client.exceptions.JaxmppException
import tigase.jaxmpp.core.client.xmpp.stanzas.Stanza
import tigase.jaxmpp.core.client.SessionObject
import tigase.jaxmpp.j2se.ConnectionConfiguration
import tigase.jaxmpp.core.client.xml.Element
import tigase.jaxmpp.core.client.xml.DefaultElement
import tigase.jaxmpp.core.client.xmpp.forms.JabberDataElement

Jaxmpp jaxmpp = new Jaxmpp();

jaxmpp.with {
    getConnectionConfiguration().setConnectionType(ConnectionConfiguration.ConnectionType.socket)
    getConnectionConfiguration().setUserJID("admin@example.com")
    getConnectionConfiguration().setUserPassword("admin123")
}

jaxmpp.login(true);

def packet = IQ.create();
packet.setAttribute("to", "pubsub.example.com");

Element command = new DefaultElement("command");
command.setXMLNS("http://jabber.org/protocol/commands");
command.setAttribute("node", "create-node");
packet.addChild(command);

Element x = new DefaultElement("x");
x.setXMLNS("jabber:x:data");

command.addChild(x);

def data = new JabberDataElement(x);
data.addTextSingleField("node", "example");
data.addListSingleField("pubsub#node_type", "leaf");

jaxmpp.send(packet, new AsyncCallback() {
    void onError(Stanza responseStanza, tigase.jaxmpp.core.client.XMPPException.ErrorCondition error) throws JaxmppException {
        println "received error during processing request";
    }

    void onSuccess(Stanza responseStanza) throws JaxmppException {
        x = responseStanza.getFirstChild("command").getFirstChid("x");
        data = new JabberDataElement(x);
        def error = data.getField("Error");
        println "command executed with result = " + (error ? "failure, error = " + error.getFieldValue() : "success");
    }

    void onTimeout() {
        println "command timed out"
    }
});

Thread.sleep(30000);
jaxmpp.disconnect();

PubSub Node Presence Protocol

Occupant Use Case

Log in to Pubsub Node

To log in to PubSub Node user must send presence to PubSub component with additional information about node:

<presence
    from='hag66@shakespeare.lit/pda'
    id='n13mt3l'
    to='pubsub.shakespeare.lit'>
  <pubsub xmlns='tigase:pubsub:1' node='princely_musings'/>
</presence>

Component will publish this information in node:

<message from='pubsub.shakespeare.lit' to='francisco@denmark.lit' id='foo'>
  <event xmlns='http://jabber.org/protocol/pubsub#event'>
    <items node='princely_musings'>
      <item>
        <presence xmlns='tigase:pubsub:1' node='princely_musings' jid='hag66@shakespeare.lit/pda' type='available'/>
      </item>
    </items>
  </event>
</message>
<message from='pubsub.shakespeare.lit' to='bernardo@denmark.lit' id='bar'>
  <event xmlns='http://jabber.org/protocol/pubsub#event'>
    <items node='princely_musings'>
      <item>
        <presence xmlns='tigase:pubsub:1' node='princely_musings' jid='hag66@shakespeare.lit/pda' type='available'/>
      </item>
    </items>
  </event>
</message>

And then will send notification with presences of all occupants to new occupant.

Log out from PubSub Node

To logout from single node, user must send presence stanza with type unavailable:

<presence
    from='hag66@shakespeare.lit/pda'
    type='unavailable'
    to='pubsub.shakespeare.lit'>
  <pubsub xmlns='tigase:pubsub:1' node='princely_musings'/>
</presence>

Component will send events to all occupants as described:

<message from='pubsub.shakespeare.lit' to='francisco@denmark.lit' id='foo'>
  <event xmlns='http://jabber.org/protocol/pubsub#event'>
    <items node='princely_musings'>
      <item>
        <presence xmlns='tigase:pubsub:1' node='princely_musings' jid='hag66@shakespeare.lit/pda' type='unavailable'/>
      </item>
    </items>
  </event>
</message>

If component receives presence stanza with type unavailable without specified node, then component will log out user from all nodes he logged before and publish events.

Retrieving list of all Node Subscribers

To retrieve list of node subscribers, node configuration option tigase#allow_view_subscribers must be set to true:

<iq type='set'
    from='hamlet@denmark.lit/elsinore'
    to='pubsub.shakespeare.lit'
    id='config2'>
  <pubsub xmlns='http://jabber.org/protocol/pubsub#owner'>
    <configure node='princely_musings'>
      <x xmlns='jabber:x:data' type='submit'>
        <field var='FORM_TYPE' type='hidden'>
          <value>http://jabber.org/protocol/pubsub#node_config</value>
        </field>
        <field var='tigase#allow_view_subscribers'><value>1</value></field>
      </x>
    </configure>
  </pubsub>
</iq>

When option is enabled, each subscriber may get list of subscribers the same way as owner.

<iq type='get'
    from='hamlet@denmark.lit/elsinore'
    to='pubsub.shakespeare.lit'
    id='subman1'>
  <pubsub xmlns='http://jabber.org/protocol/pubsub#owner'>
    <subscriptions node='princely_musings'/>
  </pubsub>
</iq>

There is extension to filter returned list:

<iq type='get'
    from='hamlet@denmark.lit/elsinore'
    to='pubsub.shakespeare.lit'
    id='subman1'>
  <pubsub xmlns='http://jabber.org/protocol/pubsub#owner'>
    <subscriptions node='princely_musings'>
        <filter xmlns='tigase:pubsub:1'>
            <jid contains='@denmark.lit' />
        </filter>
    </subscriptions>
  </pubsub>
</iq>

In this example will be returned all subscriptions of users from domain "denmark.lit". == Offline Message Sink :author: Bartosz Malkowski :version: v2.0 November 2016. Reformatted for v8.0.0.

Messages sent to offline users is published in pubsub node, from where that message is sent to all the node subscribers as a pubsub notification.

<message from='pubsub.coffeebean.local' to='bard@shakespeare.lit' id='foo'>
  <event xmlns='http://jabber.org/protocol/pubsub#event'>
    <items node='message_sink'>
      <item id='ae890ac52d0df67ed7cfdf51b644e901'>
        <message type="chat" xmlns="jabber:client" id="x2ps6u0004"
          to="userB_h6x1bt0002@coffeebean.local"
          from="userA_uyhx8p0001@coffeebean.local/1149352695-tigase-20">
          <body>Hello</body>
        </message>
      </item>
    </items>
  </event>
</message>
Configuration

The pubsub node must be created and configured beforehand:

Create node
<iq type='set'
    to='pubsub.coffeebean.local'
    id='create1'>
  <pubsub xmlns='http://jabber.org/protocol/pubsub'>
    <create node='message_sink'/>
  </pubsub>
</iq>

After that is done, you need to add SessionManager as a publisher:

Add sess-man as publisher
<iq type='set'
    to='pubsub.coffeebean.local'
    id='ent2'>
  <pubsub xmlns='http://jabber.org/protocol/pubsub#owner'>
    <affiliations node='message_sink'>
      <affiliation jid='sess-man@coffeebean.local' affiliation='publisher'/>
    </affiliations>
  </pubsub>
</iq>

Finally, the 'msgoffline' offline messages processor must be configured as well

config.tdsl configuration
sess-man {
    msgoffline () {
        msg-pubsub-jid = 'pubsub.coffeebean.local'
        msg-pubsub-node = 'message_sink'
        msg-pubsub-publisher = 'sess-man@coffeebean.local'
    }
}
Usage

Because these sinks use a standard pubsub component, administration of the sink node is identical to any other pubsub node. XEP-0060 defines standard pubsub usage and management.

Managing Subscriptions
Add new Subscriber
<iq type='set'
    to='pubsub.coffeebean.local'
    id='subman2'>
  <pubsub xmlns='http://jabber.org/protocol/pubsub#owner'>
    <subscriptions node='message_sink'>
      <subscription jid='bard@shakespeare.lit' subscription='subscribed'/>
    </subscriptions>
  </pubsub>
</iq>
Remove Subscriber
<iq type='set'
    to='pubsub.coffeebean.local'
    id='subman2'>
  <pubsub xmlns='http://jabber.org/protocol/pubsub#owner'>
    <subscriptions node='message_sink'>
      <subscription jid='bard@shakespeare.lit' subscription='none'/>
    </subscriptions>
  </pubsub>
</iq>

REST API

All example calls to pubsub REST API are prepared for pubsub component running at pubsub.example.com. It is required to replace this value with JID of pubsub component from your installation.

It is possible to provide parameters to requests as:

XML
All parameters passed in content of HTTP request needs to be wrapped with <data/> tag as root tag of XML document, while returned parameters will be wrapped <result/> tag as root tag of XML document.
JSON
Parameters must be passed as serialized JSON object. Additionally Content-Type header of HTTP request needs to be set to application/json.

Create a node

HTTP URI: /rest/pubsub/pubsub.example.com/create-node

Available HTTP methods:

GET

Method returns example content which contains all required and optional parameters that may be passed to newly created node.

POST

Command requires fields node and pubsub#node_type to be filled with proper values for execution.

  • node - field should contain id of node to create
  • owner - field may contains jid which should be used as jid of owner of newly created node (will use jid of Tigase HTTP API Component if not passed)
  • pubsub#node_type - should contain type of node to create (two values are possible: leaf - node to which items will be published, collection - node which will contain other nodes)

Example content to create node of id example and of type leaf and with owner set to admin@example.com.

Using XML

Request in XML. 

<data>
  <node>example</node>
  <owner>admin@example.com</owner>
  <pubsub prefix="true">
    <node_type>leaf</node_type>
  </pubsub>
</data>

Response in XML. 

<result>
  <Note type="fixed">
    <value>Operation successful</value>
  </Note>
</result>

Using JSON

Request in JSON. 

{
  "node" : "example",
  "owner" : "admin@example.com",
  "pubsub#node_type" : "leaf"
}

Response in JSON. 

{
  "Note": "Operation successful"
}

Delete a node

HTTP URI: /rest/pubsub/pubsub.example.com/delete-node

Available HTTP methods:

GET

Method returns example content which contains all required and optional parameters that may be passed.

POST

Command requires field node to be filled.

  • node - field should contain id of node to delete

Example content to delete node with id example

Using XML

Request in XML. 

<data>
  <node>example</node>
</data>

Response in XML. 

<result>
  <Note type="fixed">
    <value>Operation successful</value>
  </Note>
</result>

Using JSON

Request in JSON. 

{
  "node" : "example"
}

Response in JSON. 

{
  "Note" : "Operation successful"
}

Subscribe to a node

HTTP URI: /rest/pubsub/pubsub.example.com/subscribe-node

Available HTTP methods:

GET

Method returns example content which contains all required and optional parameters that may be passed.

POST

Command requires fields node and jids to be filled.

  • node - field should contain id of node to subscribe to
  • jids - field should contain list of jids to be subscribed to node

Example content to subscribe to node with id example users with jid test1@example.com and test2@example.com

Using XML

Request in XML. 

<data>
  <node>example</node>
  <jids>
    <value>test1@example.com</value>
    <value>test2@example.com</value>
  </jids>
</data>

Response in XML. 

<result>
  <Note type="fixed">
    <value>Operation successful</value>
  </Note>
</result>

Using JSON

Request in JSON. 

{
  "node" : "example",
  "jids" : [
    "test1@example.com",
    "test2@example.com"
  ]
}

Response in JSON. 

{
  "Note" : "Operation successful"
}

Unsubscribe from a node

HTTP URI: /rest/pubsub/pubsub.example.com/unsubscribe-node

Available HTTP methods:

GET

Method returns example content which contains all required and optional parameters that may be passed.

POST

Command requires fields node and jids to be filled.

  • node - field should contain id of node to unsubscribe from
  • jids - field should contain list of jids to be unsubscribed from node

Example content to unsubscribe from node with id example users test1@example.com and test2@example.com

Using XML

Request in XML. 

<data>
  <node>example</node>
  <jids>
    <value>test@example.com</value>
    <value>test2@example.com</value>
  </jids>
</data>

Response in XML. 

<result>
  <Note type="fixed">
    <value>Operation successful</value>
  </Note>
</result>

Using JSON

Request in JSON. 

{
  "node" : "example.com",
  "jids" : [
    "test@example.com",
    "test2@example.com"
  ]
}

Response in JSON. 

{
  "Note" : "Operation successful"
}

Publish an item to a node

HTTP URI: /rest/pubsub/pubsub.example.com/publish-item

Available HTTP methods:

GET

Method returns example content which contains all required and optional parameters that may be passed.

POST

Command requires fields node and entry to be filled

  • node - field should contain id of node to publish to
  • item-id - field may contain id of entry to publish
  • expire-at - field may contain timestamp (in XEP-0082 format) after which item should not be delivered to user
  • entry - field should contain multi-line entry content which should be valid XML value for an item

Example content to publish item with id item-1 to node with id example and with content in example field. P

Using XML
with XML payload

In this example we will use following XML payload:

Payload. 

<item-entry>
  <title>Example 1</title>
  <content>Example content</content>
</item-entry>

Request in XML. 

<data>
  <node>example</node>
  <item-id>item-1</item-id>
  <expire-at>2015-05-13T16:05:00+02:00</expire-at>
  <entry>
    <item-entry>
      <title>Example 1</title>
      <content>Example content</content>
    </item-entry>
  </entry>
</data>

Response in XML. 

<result>
  <Note type="fixed">
    <value>Operation successful</value>
  </Note>
</result>

with JSON payload

It is possible to publish JSON payload as value of published XML element. In example below we are publishing following JSON object:

Payload. 

{ "key-1" : 2, "key-2" : "value-2" }

Request in XML. 

<data>
  <node>example</node>
  <item-id>item-1</item-id>
  <expire-at>2015-05-13T16:05:00+02:00</expire-at>
  <entry>
    <payload>{ &quot;key-1&quot; : 2, &quot;key-2&quot; : &quot;value-2&quot; }</payload>
  </entry>
</data>

Response in XML. 

<result>
  <Note type="fixed">
    <value>Operation successful</value>
  </Note>
</result>

Using JSON
with XML payload

To publish XML using JSON you need to set serialized XML payload as value for entry key. In this example we will use following XML payload:

Payload. 

<item-entry>
  <title>Example 1</title>
  <content>Example content</content>
</item-entry>

Request in JSON. 

{
  "node" : "example",
  "item-id" : "item-1",
  "expire-at" : "2015-05-13T16:05:00+02:00",
  "entry" : "<item-entry>
    <title>Example 1</title>
    <content>Example content</content>
  </item-entry>"
}

Response in JSON. 

{
  "Note" : "Operation successful"
}

with JSON payload

As JSON needs to be set as a value of an XML element it will be wrapped on server side as a value for <payload/> element.

Payload. 

{ "key-1" : 2, "key-2" : "value-2" }

Request in JSON. 

{
  "node" : "example",
  "item-id" : "item-1",
  "expire-at" : "2015-05-13T16:05:00+02:00",
  "entry" : {
    "key-1" : 2,
    "key-2" : "value-2"
  }
}

Response in JSON. 

{
  "Note" : "Operation successful"
}

Published item. 

<payload>{ &quot;key-1&quot; : 2, &quot;key-2&quot; : &quot;value-2&quot; }</payload>

Delete an item from a node

HTTP URI: /rest/pubsub/pubsub.example.com/delete-item

Available HTTP methods:

GET

Method returns example content which contains all required and optional parameters that may be passed.

POST

Command requires fields node and item-id to be filled

  • node - field contains id of node to publish to
  • item-id - field contains id of entry to publish

Example content to delete an item with id item-1 from node with id example.

Using XML

Request in XML. 

<data>
  <node>example</node>
  <item-id>item-1</item-id>
</data>

Response in XML. 

<result>
  <Note type="fixed">
    <value>Operation successful</value>
  </Note>
</result>

Using JSON

Request in JSON. 

{
  "node" : "example",
  "item-id" : "item-1"
}

Response in JSON. 

{
  "Note" : "Operation successful"
}

List available nodes

HTTP URI: /rest/pubsub/pubsub.example.com/list-nodes

Available HTTP methods:

GET

Method returns list of available pubsub nodes for domain passed as part of URI (pubsub.example.com).

Example response in XML. 

<result>
  <title>List of available nodes</title>
  <nodes label="Nodes" type="text-multi">
    <value>test</value>
    <value>node_54idf40037</value>
    <value>node_3ws5lz0037</value>
  </nodes>
</result>

in which we see nodes: test, node_54idf40037 and node_3ws5lz0037.

Example response in JSON. 

{
  "title" : "List of available nodes",
  "nodes" : [
    "test",
    "node_54idf40037",
    "node_3ws5lz0037"
  ]
}

in which we see nodes: test, node_54idf40037 and node_3ws5lz0037.

List published items on node

HTTP URI: /rest/pubsub/pubsub.example.com/list-items

Available HTTP methods:

GET

Method returns example content which contains all required and optional parameters that may be passed.

POST

Command requires field node to be filled

  • node - field contains id of node which items we want to list

Example content to list of items published on node with id example.

Using XML

Request in XML. 

<data>
  <node>example</node>
</data>

Response in XML. 

<result>
  <title>List of PubSub node items</title>
  <node label="Node" type="text-single">
    <value>example</value>
  </node>
  <items label="Items" type="text-multi">
    <value>item-1</value>
    <value>item-2</value>
  </items>
</result>

where item-1 and item-2 are identifiers of published items for node example.

Using JSON

Request in JSON. 

{
  "node" : "example"
}

Response in JSON. 

{
  "title" : "List of PubSub node items",
  "node" : "example",
  "items" : [
    "item-1",
    "item-2"
  ]
}

where item-1 and item-2 are identifiers of published items for node example.

Retrieve item published on node

HTTP URI: /rest/pubsub/pubsub.example.com/retrieve-item

Available HTTP methods:

GET

Method returns example content which contains all required and optional parameters that may be passed.

POST

Command requires fields node and item-id to be filled

  • node - field contains id of node which items we want to list
  • item-id - field contains id of item to retrieve

Example content to list of items published on node with id example.

Using XML

Request in XML. 

<data>
  <node>example</node>
  <item-id>item-1</item>
</data>

Response in XML. 

<result>
  <title>Retrieve PubSub node item</title>
  <node label="Node" type="text-single">
    <value>example</value>
  </node>
  <item-id label="Item ID" type="text-single">
    <value>item-1</value>
  </item-id>
  <item label="Item" type="text-multi">
    <value>
      <item expire-at="2015-05-13T14:05:00Z" id="item-1">
        <item-entry>
          <title>Example 1</title>
          <content>Example content</content>
        </item-entry>
      </item>
    </value>
  </item>
</result>

inside item element there is XML encoded element which is published on node example with id item-1.

Using JSON

Request in JSON. 

{
  "node" : "example",
  "item-id" : "item-1"
}

Response in JSON. 

{
  "title" : "Retrieve PubSub node item",
  "node" : "example",
  "item-id" : "item-1",
  "item" : [
    "<item expire-at\"2015-05-13T14:05:00Z\" id=\"item-1\">
      <item-entry>
        <title>Example 1</title>
        <content>Example content</content>
      </item-entry>
    </item>"
  ]
}

Retrieve user subscriptions

HTTP URI: /rest/pubsub/pubsub.example.com/retrieve-user-subscriptions

Available HTTP methods:

GET

Method returns example content which contains all required and optional parameters that may be passed.

POST

Command requires field jid to be filled.

  • jid - field contains JID of a user for which we want to retrieve subscriptions
  • node-pattern - field contains regex pattern to match. When field is not empty, request will return only subscribed nodes which match this pattern. If field should be empty it may be omitted in a request.

Example content to retrieve list of nodes to which user test@example.com is subscribed at pubsub.example.com which starts with test- (pattern test-.*)

Using XML

Request in XML. 

<data>
  <jid>test@example.com</jid>
  <node-pattern>test-.*</node-pattern>
</data>

Response in XML. 

<result>
  <nodes label="Nodes" type="text-multi">
    <value>test-123</value>
    <value>test-342</value>
  </nodes>
</result>

Using JSON

Request in JSON. 

{
  "jid" : "test@example.com",
  "node-pattern" : "test-.*"
}

Response in JSON. 

{
  "nodes" : [
    "test-123",
    "test-342"
  ]
}

AdHoc Commands

Similar to the HTTP API, AdHoc commands based on groovy scripts can be sent to this component to do a number of tasks. All scripts for these Ad-hoc commands are found at sec/main/groovy/tigase/admin in source distributions, or at this link. To use them, the scripts need to be copied into the scripts/admin/pubsub folder in the Tigase installation directory. For all examples, the component address will be pubsub.example.com.

Create a Node

Ad-hoc command node: create-node Required role: Service Administrator

Command requires fields node and pubsub#node_type to be filled with proper values for execution. - node Field containing id of node to create. - pubsub#node_type Contains one of two possible values. * leaf-node Node that will be published. * collection Node that will contain other nodes.

Other fields are optional fields that can be set to change configuration of newly create node to different configuration than default.

Example call using TCLMT:

bin/tclmt.sh -u admin@example.com -p admin123 remote pubsub.example.com create-node example admin@example.com leaf
Delete a Node

Ad-hoc command node: delete-node Required role: Service Administrator

Command requires node field to be filled. - node Field containing id of node to delete.

Example call using TCLMT:

bin/tclmt.sh -u admin@example.com -p admin123 remote pubsub.example.com delete-node example
Subscribe to a Node

Ad-hoc command node: subscribe-node Required role: Service Administrator

Command requires node and jids nodes to be filled. - node Field containing node to subscribe to. - jids Field containing list of JIDs to subscribe to the node.

Example call using TCLMT:

bin/tclmt.sh -u admin@example.com -p admin123 remote pubsub.example.com subscribe-node example admin@example.com,test1@example.com
Unsubscribe to a Node

Ad-hoc command node: unsubscribe-node Required role: Service Administrator

Command requires node and jids nodes to be filled. - node Field containing node to unsubscribe to. - jids Field containing list of JIDs to unsubscribe to the node.

Example call using TCLMT:

bin/tclmt.sh -u admin@example.com -p admin123 remote pubsub.example.com unsubscribe-node example admin@example.com,test2@example.com
Publish an item to a Node

Ad-hoc command node: publish-item Required role: Service Administrator

Command requires fields node and entry to be filled. - node Field containing id of node to publish to. - item-id Field may contain id of entry to publish, can be empty. - entry Field should contain multi-line entry content that should be valid XML values for items.

This command due to it’s complexity cannot be easily executed by TCLMT using default remote script which provides support for basic adhoc commands. Example call using TCLMT:

bin/tclmt.sh -u admin@example.com -p admin123 remote pubsub.example.com publish-item example item-1 '<entry><title>Example 1</title></entry>'

Example Groovy script to execute create-node command using JAXMPP2

import tigase.jaxmpp.j2se.Jaxmpp
import tigase.jaxmpp.core.client.AsyncCallback
import tigase.jaxmpp.core.client.exceptions.JaxmppException
import tigase.jaxmpp.core.client.xmpp.stanzas.Stanza
import tigase.jaxmpp.core.client.SessionObject
import tigase.jaxmpp.j2se.ConnectionConfiguration
import tigase.jaxmpp.core.client.xml.Element
import tigase.jaxmpp.core.client.xml.DefaultElement
import tigase.jaxmpp.core.client.xmpp.forms.JabberDataElement

Jaxmpp jaxmpp = new Jaxmpp();

jaxmpp.with {
    getConnectionConfiguration().setConnectionType(ConnectionConfiguration.ConnectionType.socket)
    getConnectionConfiguration().setUserJID("admin@example.com")
    getConnectionConfiguration().setUserPassword("admin123")
}

jaxmpp.login(true);

def packet = IQ.create();
packet.setAttribute("to", "pubsub.example.com");

Element command = new DefaultElement("command");
command.setXMLNS("http://jabber.org/protocol/commands");
command.setAttribute("node", "create-node");
packet.addChild(command);

Element x = new DefaultElement("x");
x.setXMLNS("jabber:x:data");

command.addChild(x);

def data = new JabberDataElement(x);
data.addTextSingleField("node", "example");
data.addListSingleField("pubsub#node_type", "leaf");

jaxmpp.send(packet, new AsyncCallback() {
    void onError(Stanza responseStanza, tigase.jaxmpp.core.client.XMPPException.ErrorCondition error) throws JaxmppException {
        println "received error during processing request";
    }

    void onSuccess(Stanza responseStanza) throws JaxmppException {
        x = responseStanza.getFirstChild("command").getFirstChid("x");
        data = new JabberDataElement(x);
        def error = data.getField("Error");
        println "command executed with result = " + (error ? "failure, error = " + error.getFieldValue() : "success");
    }

    void onTimeout() {
        println "command timed out"
    }
});

Thread.sleep(30000);
jaxmpp.disconnect();
PubSub Node Presence Protocol

Occupant Use Case

Log in to Pubsub Node

To log in to PubSub Node user must send presence to PubSub component with additional information about node:

<presence
    from='hag66@shakespeare.lit/pda'
    id='n13mt3l'
    to='pubsub.shakespeare.lit'>
  <pubsub xmlns='tigase:pubsub:1' node='princely_musings'/>
</presence>

Component will publish this information in node:

<message from='pubsub.shakespeare.lit' to='francisco@denmark.lit' id='foo'>
  <event xmlns='http://jabber.org/protocol/pubsub#event'>
    <items node='princely_musings'>
      <item>
        <presence xmlns='tigase:pubsub:1' node='princely_musings' jid='hag66@shakespeare.lit/pda' type='available'/>
      </item>
    </items>
  </event>
</message>
<message from='pubsub.shakespeare.lit' to='bernardo@denmark.lit' id='bar'>
  <event xmlns='http://jabber.org/protocol/pubsub#event'>
    <items node='princely_musings'>
      <item>
        <presence xmlns='tigase:pubsub:1' node='princely_musings' jid='hag66@shakespeare.lit/pda' type='available'/>
      </item>
    </items>
  </event>
</message>

And then will send notification with presences of all occupants to new occupant.

Log out from PubSub Node

To logout from single node, user must send presence stanza with type unavailable:

<presence
    from='hag66@shakespeare.lit/pda'
    type='unavailable'
    to='pubsub.shakespeare.lit'>
  <pubsub xmlns='tigase:pubsub:1' node='princely_musings'/>
</presence>

Component will send events to all occupants as described:

<message from='pubsub.shakespeare.lit' to='francisco@denmark.lit' id='foo'>
  <event xmlns='http://jabber.org/protocol/pubsub#event'>
    <items node='princely_musings'>
      <item>
        <presence xmlns='tigase:pubsub:1' node='princely_musings' jid='hag66@shakespeare.lit/pda' type='unavailable'/>
      </item>
    </items>
  </event>
</message>

If component receives presence stanza with type unavailable without specified node, then component will log out user from all nodes he logged before and publish events.

Retrieving list of all Node Subscribers

To retrieve list of node subscribers, node configuration option tigase#allow_view_subscribers must be set to true:

<iq type='set'
    from='hamlet@denmark.lit/elsinore'
    to='pubsub.shakespeare.lit'
    id='config2'>
  <pubsub xmlns='http://jabber.org/protocol/pubsub#owner'>
    <configure node='princely_musings'>
      <x xmlns='jabber:x:data' type='submit'>
        <field var='FORM_TYPE' type='hidden'>
          <value>http://jabber.org/protocol/pubsub#node_config</value>
        </field>
        <field var='tigase#allow_view_subscribers'><value>1</value></field>
      </x>
    </configure>
  </pubsub>
</iq>

When option is enabled, each subscriber may get list of subscribers the same way as owner.

<iq type='get'
    from='hamlet@denmark.lit/elsinore'
    to='pubsub.shakespeare.lit'
    id='subman1'>
  <pubsub xmlns='http://jabber.org/protocol/pubsub#owner'>
    <subscriptions node='princely_musings'/>
  </pubsub>
</iq>

There is extension to filter returned list:

<iq type='get'
    from='hamlet@denmark.lit/elsinore'
    to='pubsub.shakespeare.lit'
    id='subman1'>
  <pubsub xmlns='http://jabber.org/protocol/pubsub#owner'>
    <subscriptions node='princely_musings'>
        <filter xmlns='tigase:pubsub:1'>
            <jid contains='@denmark.lit' />
        </filter>
    </subscriptions>
  </pubsub>
</iq>

In this example will be returned all subscriptions of users from domain "denmark.lit".

Offline Message Sink

Messages sent to offline users is published in pubsub node, from where that message is sent to all the node subscribers as a pubsub notification.

<message from='pubsub.coffeebean.local' to='bard@shakespeare.lit' id='foo'>
  <event xmlns='http://jabber.org/protocol/pubsub#event'>
    <items node='message_sink'>
      <item id='ae890ac52d0df67ed7cfdf51b644e901'>
        <message type="chat" xmlns="jabber:client" id="x2ps6u0004"
          to="userB_h6x1bt0002@coffeebean.local"
          from="userA_uyhx8p0001@coffeebean.local/1149352695-tigase-20">
          <body>Hello</body>
        </message>
      </item>
    </items>
  </event>
</message>
Configuration

The pubsub node must be created and configured beforehand:

Create node
<iq type='set'
    to='pubsub.coffeebean.local'
    id='create1'>
  <pubsub xmlns='http://jabber.org/protocol/pubsub'>
    <create node='message_sink'/>
  </pubsub>
</iq>

After that is done, you need to add SessionManager as a publisher:

Add sess-man as publisher
<iq type='set'
    to='pubsub.coffeebean.local'
    id='ent2'>
  <pubsub xmlns='http://jabber.org/protocol/pubsub#owner'>
    <affiliations node='message_sink'>
      <affiliation jid='sess-man@coffeebean.local' affiliation='publisher'/>
    </affiliations>
  </pubsub>
</iq>

Finally, the 'msgoffline' offline messages processor must be configured as well

config.tdsl configuration
sess-man {
    msgoffline () {
        msg-pubsub-jid = 'pubsub.coffeebean.local'
        msg-pubsub-node = 'message_sink'
        msg-pubsub-publisher = 'sess-man@coffeebean.local'
    }
}
Usage

Because these sinks use a standard pubsub component, administration of the sink node is identical to any other pubsub node. XEP-0060 defines standard pubsub usage and management.

Managing Subscriptions
Add new Subscriber
<iq type='set'
    to='pubsub.coffeebean.local'
    id='subman2'>
  <pubsub xmlns='http://jabber.org/protocol/pubsub#owner'>
    <subscriptions node='message_sink'>
      <subscription jid='bard@shakespeare.lit' subscription='subscribed'/>
    </subscriptions>
  </pubsub>
</iq>
Remove Subscriber
<iq type='set'
    to='pubsub.coffeebean.local'
    id='subman2'>
  <pubsub xmlns='http://jabber.org/protocol/pubsub#owner'>
    <subscriptions node='message_sink'>
      <subscription jid='bard@shakespeare.lit' subscription='none'/>
    </subscriptions>
  </pubsub>
</iq>

REST API

All example calls to pubsub REST API are prepared for pubsub component running at pubsub.example.com. It is required to replace this value with JID of pubsub component from your installation.

It is possible to provide parameters to requests as:

XML
All parameters passed in content of HTTP request needs to be wrapped with <data/> tag as root tag of XML document, while returned parameters will be wrapped <result/> tag as root tag of XML document.
JSON
Parameters must be passed as serialized JSON object. Additionally Content-Type header of HTTP request needs to be set to application/json.
Create a node

HTTP URI: /rest/pubsub/pubsub.example.com/create-node

Available HTTP methods:

GET

Method returns example content which contains all required and optional parameters that may be passed to newly created node.

POST

Command requires fields node and pubsub#node_type to be filled with proper values for execution.

  • node - field should contain id of node to create
  • owner - field may contains jid which should be used as jid of owner of newly created node (will use jid of Tigase HTTP API Component if not passed)
  • pubsub#node_type - should contain type of node to create (two values are possible: leaf - node to which items will be published, collection - node which will contain other nodes)

Example content to create node of id example and of type leaf and with owner set to admin@example.com.

Using XML

Request in XML. 

<data>
  <node>example</node>
  <owner>admin@example.com</owner>
  <pubsub prefix="true">
    <node_type>leaf</node_type>
  </pubsub>
</data>

Response in XML. 

<result>
  <Note type="fixed">
    <value>Operation successful</value>
  </Note>
</result>

Using JSON

Request in JSON. 

{
  "node" : "example",
  "owner" : "admin@example.com",
  "pubsub#node_type" : "leaf"
}

Response in JSON. 

{
  "Note": "Operation successful"
}

Delete a node

HTTP URI: /rest/pubsub/pubsub.example.com/delete-node

Available HTTP methods:

GET

Method returns example content which contains all required and optional parameters that may be passed.

POST

Command requires field node to be filled.

  • node - field should contain id of node to delete

Example content to delete node with id example

Using XML

Request in XML. 

<data>
  <node>example</node>
</data>

Response in XML. 

<result>
  <Note type="fixed">
    <value>Operation successful</value>
  </Note>
</result>

Using JSON

Request in JSON. 

{
  "node" : "example"
}

Response in JSON. 

{
  "Note" : "Operation successful"
}

Subscribe to a node

HTTP URI: /rest/pubsub/pubsub.example.com/subscribe-node

Available HTTP methods:

GET

Method returns example content which contains all required and optional parameters that may be passed.

POST

Command requires fields node and jids to be filled.

  • node - field should contain id of node to subscribe to
  • jids - field should contain list of jids to be subscribed to node

Example content to subscribe to node with id example users with jid test1@example.com and test2@example.com

Using XML

Request in XML. 

<data>
  <node>example</node>
  <jids>
    <value>test1@example.com</value>
    <value>test2@example.com</value>
  </jids>
</data>

Response in XML. 

<result>
  <Note type="fixed">
    <value>Operation successful</value>
  </Note>
</result>

Using JSON

Request in JSON. 

{
  "node" : "example",
  "jids" : [
    "test1@example.com",
    "test2@example.com"
  ]
}

Response in JSON. 

{
  "Note" : "Operation successful"
}

Unsubscribe from a node

HTTP URI: /rest/pubsub/pubsub.example.com/unsubscribe-node

Available HTTP methods:

GET

Method returns example content which contains all required and optional parameters that may be passed.

POST

Command requires fields node and jids to be filled.

  • node - field should contain id of node to unsubscribe from
  • jids - field should contain list of jids to be unsubscribed from node

Example content to unsubscribe from node with id example users test1@example.com and test2@example.com

Using XML

Request in XML. 

<data>
  <node>example</node>
  <jids>
    <value>test@example.com</value>
    <value>test2@example.com</value>
  </jids>
</data>

Response in XML. 

<result>
  <Note type="fixed">
    <value>Operation successful</value>
  </Note>
</result>

Using JSON

Request in JSON. 

{
  "node" : "example.com",
  "jids" : [
    "test@example.com",
    "test2@example.com"
  ]
}

Response in JSON. 

{
  "Note" : "Operation successful"
}

Publish an item to a node

HTTP URI: /rest/pubsub/pubsub.example.com/publish-item

Available HTTP methods:

GET

Method returns example content which contains all required and optional parameters that may be passed.

POST

Command requires fields node and entry to be filled

  • node - field should contain id of node to publish to
  • item-id - field may contain id of entry to publish
  • expire-at - field may contain timestamp (in XEP-0082 format) after which item should not be delivered to user
  • entry - field should contain multi-line entry content which should be valid XML value for an item

Example content to publish item with id item-1 to node with id example and with content in example field. P

Using XML
with XML payload

In this example we will use following XML payload:

Payload. 

<item-entry>
  <title>Example 1</title>
  <content>Example content</content>
</item-entry>

Request in XML. 

<data>
  <node>example</node>
  <item-id>item-1</item-id>
  <expire-at>2015-05-13T16:05:00+02:00</expire-at>
  <entry>
    <item-entry>
      <title>Example 1</title>
      <content>Example content</content>
    </item-entry>
  </entry>
</data>

Response in XML. 

<result>
  <Note type="fixed">
    <value>Operation successful</value>
  </Note>
</result>

with JSON payload

It is possible to publish JSON payload as value of published XML element. In example below we are publishing following JSON object:

Payload. 

{ "key-1" : 2, "key-2" : "value-2" }

Request in XML. 

<data>
  <node>example</node>
  <item-id>item-1</item-id>
  <expire-at>2015-05-13T16:05:00+02:00</expire-at>
  <entry>
    <payload>{ &quot;key-1&quot; : 2, &quot;key-2&quot; : &quot;value-2&quot; }</payload>
  </entry>
</data>

Response in XML. 

<result>
  <Note type="fixed">
    <value>Operation successful</value>
  </Note>
</result>

Using JSON
with XML payload

To publish XML using JSON you need to set serialized XML payload as value for entry key. In this example we will use following XML payload:

Payload. 

<item-entry>
  <title>Example 1</title>
  <content>Example content</content>
</item-entry>

Request in JSON. 

{
  "node" : "example",
  "item-id" : "item-1",
  "expire-at" : "2015-05-13T16:05:00+02:00",
  "entry" : "<item-entry>
    <title>Example 1</title>
    <content>Example content</content>
  </item-entry>"
}

Response in JSON. 

{
  "Note" : "Operation successful"
}

with JSON payload

As JSON needs to be set as a value of an XML element it will be wrapped on server side as a value for <payload/> element.

Payload. 

{ "key-1" : 2, "key-2" : "value-2" }

Request in JSON. 

{
  "node" : "example",
  "item-id" : "item-1",
  "expire-at" : "2015-05-13T16:05:00+02:00",
  "entry" : {
    "key-1" : 2,
    "key-2" : "value-2"
  }
}

Response in JSON. 

{
  "Note" : "Operation successful"
}

Published item. 

<payload>{ &quot;key-1&quot; : 2, &quot;key-2&quot; : &quot;value-2&quot; }</payload>

Delete an item from a node

HTTP URI: /rest/pubsub/pubsub.example.com/delete-item

Available HTTP methods:

GET

Method returns example content which contains all required and optional parameters that may be passed.

POST

Command requires fields node and item-id to be filled

  • node - field contains id of node to publish to
  • item-id - field contains id of entry to publish

Example content to delete an item with id item-1 from node with id example.

Using XML

Request in XML. 

<data>
  <node>example</node>
  <item-id>item-1</item-id>
</data>

Response in XML. 

<result>
  <Note type="fixed">
    <value>Operation successful</value>
  </Note>
</result>

Using JSON

Request in JSON. 

{
  "node" : "example",
  "item-id" : "item-1"
}

Response in JSON. 

{
  "Note" : "Operation successful"
}

List available nodes

HTTP URI: /rest/pubsub/pubsub.example.com/list-nodes

Available HTTP methods:

GET

Method returns list of available pubsub nodes for domain passed as part of URI (pubsub.example.com).

Example response in XML. 

<result>
  <title>List of available nodes</title>
  <nodes label="Nodes" type="text-multi">
    <value>test</value>
    <value>node_54idf40037</value>
    <value>node_3ws5lz0037</value>
  </nodes>
</result>

in which we see nodes: test, node_54idf40037 and node_3ws5lz0037.

Example response in JSON. 

{
  "title" : "List of available nodes",
  "nodes" : [
    "test",
    "node_54idf40037",
    "node_3ws5lz0037"
  ]
}

in which we see nodes: test, node_54idf40037 and node_3ws5lz0037.

List published items on node

HTTP URI: /rest/pubsub/pubsub.example.com/list-items

Available HTTP methods:

GET

Method returns example content which contains all required and optional parameters that may be passed.

POST

Command requires field node to be filled

  • node - field contains id of node which items we want to list

Example content to list of items published on node with id example.

Using XML

Request in XML. 

<data>
  <node>example</node>
</data>

Response in XML. 

<result>
  <title>List of PubSub node items</title>
  <node label="Node" type="text-single">
    <value>example</value>
  </node>
  <items label="Items" type="text-multi">
    <value>item-1</value>
    <value>item-2</value>
  </items>
</result>

where item-1 and item-2 are identifiers of published items for node example.

Using JSON

Request in JSON. 

{
  "node" : "example"
}

Response in JSON. 

{
  "title" : "List of PubSub node items",
  "node" : "example",
  "items" : [
    "item-1",
    "item-2"
  ]
}

where item-1 and item-2 are identifiers of published items for node example.

Retrieve item published on node

HTTP URI: /rest/pubsub/pubsub.example.com/retrieve-item

Available HTTP methods:

GET

Method returns example content which contains all required and optional parameters that may be passed.

POST

Command requires fields node and item-id to be filled

  • node - field contains id of node which items we want to list
  • item-id - field contains id of item to retrieve

Example content to list of items published on node with id example.

Using XML

Request in XML. 

<data>
  <node>example</node>
  <item-id>item-1</item>
</data>

Response in XML. 

<result>
  <title>Retrieve PubSub node item</title>
  <node label="Node" type="text-single">
    <value>example</value>
  </node>
  <item-id label="Item ID" type="text-single">
    <value>item-1</value>
  </item-id>
  <item label="Item" type="text-multi">
    <value>
      <item expire-at="2015-05-13T14:05:00Z" id="item-1">
        <item-entry>
          <title>Example 1</title>
          <content>Example content</content>
        </item-entry>
      </item>
    </value>
  </item>
</result>

inside item element there is XML encoded element which is published on node example with id item-1.

Using JSON

Request in JSON. 

{
  "node" : "example",
  "item-id" : "item-1"
}

Response in JSON. 

{
  "title" : "Retrieve PubSub node item",
  "node" : "example",
  "item-id" : "item-1",
  "item" : [
    "<item expire-at\"2015-05-13T14:05:00Z\" id=\"item-1\">
      <item-entry>
        <title>Example 1</title>
        <content>Example content</content>
      </item-entry>
    </item>"
  ]
}

Retrieve user subscriptions

HTTP URI: /rest/pubsub/pubsub.example.com/retrieve-user-subscriptions

Available HTTP methods:

GET

Method returns example content which contains all required and optional parameters that may be passed.

POST

Command requires field jid to be filled.

  • jid - field contains JID of a user for which we want to retrieve subscriptions
  • node-pattern - field contains regex pattern to match. When field is not empty, request will return only subscribed nodes which match this pattern. If field should be empty it may be omitted in a request.

Example content to retrieve list of nodes to which user test@example.com is subscribed at pubsub.example.com which starts with test- (pattern test-.*)

Using XML

Request in XML. 

<data>
  <jid>test@example.com</jid>
  <node-pattern>test-.*</node-pattern>
</data>

Response in XML. 

<result>
  <nodes label="Nodes" type="text-multi">
    <value>test-123</value>
    <value>test-342</value>
  </nodes>
</result>

Using JSON

Request in JSON. 

{
  "jid" : "test@example.com",
  "node-pattern" : "test-.*"
}

Response in JSON. 

{
  "nodes" : [
    "test-123",
    "test-342"
  ]
}